Valentine’s Day is coming and have I got the perfect DIY big heart day cards to make and pass out! With three designs to choose you’ll be sure to win hearts over whether it be passing them out at the office or to your favorite gal pals. After all who could resist a heart felt Valentine’s Day card! Keep reading for instructions for all three…
Supplies
- felt (red, pink, and light pink)
- scissors
- blank folded cards
- glue or hot glue gun
- assorted ribbon and yarn
Start by cutting out all hearts big and small. To make all three of these cards you will need to cut out 5 red small hearts, 4 pink small hearts, 5 light pink small hearts, and 1 big red heart.
Ombre Hearts
Instructions
- On a blank card, glue down three of the small red hearts in a row.
- Then using the pink small hearts, glue in a row below the red hearts.
- Repeat process with the light pink hearts under the pink hearts.
- Allow card to dry for about 5 minutes before use.
Pulling On My Heart Strings
Instructions
- On a blank card, in the center glue a pink small heart toward the top.
- With two small light pink hearts, glue one on each side of the pink heart toward the bottom.
- Then glue a piece of yarn or ribbon in the center of each heart, pulling to the top end of the card.
- Cut off extra yarn and ribbon and allow card to dry for 5 minutes before use.
Big Love
Instructions
- On a blank card glue down ribbon across the bottom of the card.
- Then glue a big heart in the center of the card.
- On each side of the big heart finish the card by gluing two small hearts.
- Allow card to dry for about five minutes before use.